I ended up with 115 miles on the bike this week. Considering we had one inch of sleet on the ground here on Monday morning, I’m thinking that’s not bad. And it’s much better than the paltry 65 miles I rode last week.

On Monday and Tuesday, the weather was just colder than I like to ride in. Wednesday was still chilly, but Rose and I took off on the Screamer tandem in the afternoon and rode to Purtis Creek. We picked up a piece of steel wire remnant from an automobile tire in our front tire on the way back, and had to stop a couple of times and air it up, but managed to get home before I had to take the time to fix it. We ended up with 25.2 miles.

On Thursday afternoon, I rode the Xstream to Purtis Creek for another 25.2 miles. It was still cool enough for me to appreciate the Xstream’s fairing. On Friday afternoon, I took off on the Corsa and rode to Purtis Creek, intending to ride on into Van Zandt County and do my usual 40 mile route. I instinctively turned toward home when I left Purtis Creek though, and had ridden several miles berfore realizing what I had done. I turned around and rode back for a second stop at Purtis Creek. I ended up with 40 miles. This morning, I did another ride to Purtis Creek on the Xstream, for another 25.2 miles. Rain had been forecast for late morning, but I managed to finish before it started.

My riding style has changed over the years. I’ve done my fair share of club rides, charity pay rides, and randonneuring rides, and most of my blog reports have been on those rides. But I’ve also done lots of shorter rides from home, including three years of commuting to work by bike. Most of those rides didn’t seem worthy of a blog post, so unless something out of the ordinary happened on a ride, I didn’t blog about any of them.

But, since moving to Gun Barrel City, the vast majority of my rides seem to be just short rides from home, so my blog has grown pretty quiet. I’m thinking that I’ll start trying to do weekly blog entries, summing up that week’s riding. Surely, a weeks worth of riding is worthy of a blog entry. Hopefully, the weather will improve soon, and there will be more weeks of riding over 100 miles, and very few of those 65 mile weeks.

I have ordered a fire sale size large F5 Pro from RANS. I’ve been casually looking at new bikes since my Corsa hit the 25,000 mile mark. Aluminum frames aren’t known for lasting forever. I’m plainly not as hard on equipment as many riders, but I’m no lightweight rider, either (my weight ranges from 183 to 191 pounds). I hadn’t expected to buy anything this quickly, and to be honest, until Paul posted in rbent about the RANS garage sale, the F5 wasn’t on my radar at all. My new bike was always going to be another high racer, but the F5 is probably the least sexy high racer I could have picked. It looks like RANS is going to discontinue the it in favor of the Rifle. The more I’ve thought about it though, the more sense this size large F5 makes for me.

A major consideration is the rougher roads I find myself riding on since I moved to Gun Barrel City. A steel frame, with a slightly longer wheelbase than the Corsa, and 700C wheels, is bound to provide a bit better ride. An F5 isn’t any heavier than a Corsa, and I should be able to achieve a very similar riding position, so the new bike shouldn’t slow me down any. And the price I gave RANS for this bike was too good to pass up.

One criticism of the F5 is the added flex that its 2″ round main tube has over the 2″ x 2 1/2″ ovalized tube of the Bacchettas. I have no doubt that for a rider of Kent Polk’s strength, this kind of flex would be a major negative. I’m strong, and there’s no doubt I could flex the bottom bracket for a few seconds but, lung damaged old f*rt that I am, it would only be for a few seconds. Then, I would be back to the easy spin that is standard for me. I always favored spinning over mashing, anyway, so I don’t think the flex of the F5 frame will be too much for me at all.

I had always favored a medium size high racer frame over a large. I’m within the range that will fit either size. I’m 5′ 9″ tall (almost two inches shorter than when my spine wasn’t shaped like a mountain trail), but have long legs and arms for that height (Greg alternately calls me a gorilla and spider). My xseam is ~43″. But the Euromesh seat I love is a tall seat, and with a 700C high racer, seat height does become a major consideration. With a large frame, a rider ends up further forward on the bike, and on a stick frame high racer, that equals higher off the ground. But a large frame does center your weight better between the wheels, and that plus the fact that a large has a longer wheelbase, improves the ride.

This F5 has no seat or wheels. It is also missing the v-clamp and seat angle. I ordered those two parts with the bike. I’ll start out with the Euromesh from my Corsa as a seat, and see how that works out. It’s a tall seat. If it proves to be too tall on this 700C bike, I may get something else for it.

As for wheels, I plan on getting or building some which have the Velocity A23 rims. These rims are 23mm wide, 4mm wider than the standard 19mm wide road rims, and improve the profile and ride of 23mm tires enough that I’ll likely start out running them. Imagine that, being able to take advantage of all the shopping deals you can find on 700C 23mm tires. I love the 559 A23 wheels I built for the Xstream (that are actually on the Corsa right now). With an odd size like that (MTB rims on road spaced hubs), I just ordered the parts and built them, but with 700C wheels, there are such great deals to be found on already built wheels that use the A23 rims, there are some you can buy for less than you can build a set, so I may buy already built wheels.

I’m presuming the F5 comes with a RANS B-41 handlebar. I also own a RANS three way adjustable high racer bar. I’ve always liked the narrower Bachetta tweener bar better than either of these though, so I may buy one. This bike should go very well with my new Team RANS jersey, too. LOL. I’m not sure what model year the bike is. Perhaps the serial number will tell me that. I’ll post more after I get the bike.

An image of an F5 Pro from RANS’ website.

I ended up with 130 miles of riding this week. We finally had some warmer weather and I managed to take advantage of it for four rides. On Tuesday, I rode the Corsa to Purtis Creek State Park for 25 miles. On Wednesday, Rose and I rode the Screamer tandem the same route for 25 more miles.

Yesterday, I rode the Corsa out to Purtis Creek State Park, did a loop through the camping area, then rode on east into Van Zandt County. I ended up with 40 miles. Today, I did the same route on the Corsa for another 40 miles.

On last Sunday’s 40 mile ride, I passed the 25,000 mile mark for total miles ridden on my Corsa. I’ve never even come close to that kind of mileage on any other bike. And it’s still going strong, though, after 25,000 miles, I do have thoughts about eventually replacing it. Maybe at 30,000 miles I’ll pull the trigger.

It will definitely be another high racer, something very much like the Corsa. With the rough roads everywhere around me now that I’ve moved to BFE, I’m thinking I’ll get something with 700c wheels. The bigger wheels should help the ride a bit. I like the RANS Rifles, and they are available with 700c wheels. I haven’t test ridden one, though. I may also consider this new carbon high racer from John Schlitter. It’s coming out soon and supposed to be priced comparable to an aluminum high racer. Do you suppose I could get 30,000 miles out of a carbon bike?

Today’s route.

It was pretty chilly this morning, so I waited for it to warm up, and took off on the Corsa just past noon. I did pretty much the same route as last Saturday, first riding out to Purtis Creek State Park, then on into Van Zandt County, doing a loop out to SH 19 and back. There was a pretty stiff west-southwest wind that made the return ride a chore. I ended up with 51.6 miles.

Rose and I did two 25 mile rides on the Screamer tandem this week, so I managed to ride over 100 miles for the week. There are quite a few January weeks that I don’t get that many miles, so a warm enough week to get some miles in was appreciated.

Today’s route.

The Screamer at Purtis Creek State Park.

I took off on the Xstream this afternoon and rode to Purtis Creek. I ended up with 25.2 miles. It will be my last ride of 2013. I rode a total of 5,034 miles this year. That’s a lot less than the 7,000+ miles I had ridden each of the last four years. In fact, it’s less than any annual total since my first full year of riding in 2005. My new job and a move combined to reduce my miles a lot this year. And it seems likely that this will be my new mileage normal for the next few years.

Looking back at my bike journal, I thought it would be interesting to see just how many adult miles I’ve ridden since I got back on a bike for the first time in over 40 years in September, 2004. I’ve kept a journal, and here are my annual total mileages:

2004 – 930 miles
2005 – 5,013.7 miles
2006 – 5,044.6 miles
2007 – 6,161 miles
2008 – 6,708 miles
2009 – 7,440.9 miles
2010 – 7,555.4 miles
2011 – 7,519 miles
2012 – 7,224.6 miles
2013 – 5,034.4 miles

That makes a total of 58,631 miles that I’ve ridden in my adult life, in a little over 9 years of riding. I likely won’t get that many miles in the next 10 years, but if I just managed 42,000 miles, that would make 100,000 miles of riding. A worthy goal, I’m thinking. Happy New Year, everyone!

I took off on the Xstream this morning, just before noon. I hadn’t ridden in a week and a half. Here in Gun Barrel City, we didn’t get the ice storm that DFW did, but between work and the cold and wet weather, I just haven’t ridden. I had planned on starting my ride much earlier today, before the wind got up so much, but it drizzled most of the night, and the roads were very wet when I got up. They finally looked pretty dry by late morning, so off I went.

It stayed pretty chilly on today’s ride, cloudy with drizzle at times, and the temperature slowly cooled from the mid forties to 39 degrees by the time I finished. The 30 mph north wind made it feel colder than it was, too. For the first time since my bike commuting days, I broke out my handlebar mitts, and put them on the Xstream this morning, figuring that would help. And, they certainly did.

I rode out to Purtis Creek State Park, then made my usual loop into Van Zandt County, then stopped again at Purtis Creek on the way back. I ended up with 50 miles. That spiced Chai hot tea is tasting pretty good about now. I definitely got a chill from the ride. But at least I can say I managed a few miles on the bike this week.

I was armed (handed?) with bar mitts today.

Today’s route.

The forecast for later in the week is pretty bad, cold with freezing rain or sleet. So, I figured I’d better get my riding miles early in the week. With that in mind, I got up at dark-thirty yesterday (Monday) morning, and took off on the Xstream in the darkness and pea soup fog, and rode out to Purtis Creek State Park. I ended up with 25.2 miles.

When I got home from work, there was still a couple of hours of daylight, so I did the same ride out to Purtis Creek again, for another 25.2 miles. I think that’s the first time I’ve ever done 25 mile rides both before and after work.

I got home from work early again today, so I took off on the Xstream and rode to Purtis Creek, then on into Van Zandt County. I ended up with 50.3 miles. So, I have 100 miles for the week so far, and it’s only Tuesday.

Looking at the blog, I haven’t made an entry since the beginning of November. It isn’t that I haven’t been riding. I did 13 rides in November, for almost 500 miles. That’s not a great mileage month by my standards, but it’s not bad, either. But, all the rides were solo rides from home, all 50 miles or less, nothing that seemed worthy of a blog entry.

Today’s route.

This friend joined me at the turnaround point of a 25 mile ride out to Purtis Creek on November 18th.

My 25 mile ride to Purtis Creek on November 13th was the first time I’d ridden the Xstream after work into the State Park, rather than early morning when there’s no one at the entrance. One thing about riding the Xstream, when they give me that state park receipt for taping to a windshield, I actually have a windshield to tape it to.

I didn’t get to ride the bike at all this week. With the rain early in the week and the hours I worked later in the week, it never worked out. So, I figured I would do a longer ride today. Rando friend Stephen Hazelton was hosting my Itasca Disasta 207k permanent this morning. It starts in Midlothian, which is about 60 miles from here, so I decided I would just drive over and join him.

It was 43 degrees with gusting north winds when I arrived in Midlothian for the 8:00 am ride start. That must have discouraged some of those who were going to do the ride. There were just 5 of us who showed up. I had doubts about whether or not I had brought enough clothes. And I was wearing shorts with leg warmers. With a high of 68 degrees forecast, I figured I would shed the leg warmers some time during the day. It only reached the low 60’s this afternoon. And with that north wind blowing, it didn’t feel close to that warm. I should have just worn tights.

But, it was a good ride, with good company. It was nice not to be toasted from 100 degree weather. But, this chilly weather definitely takes some getting used to. I hadn’t ridden a 200k since May, so knew I would be wiped out at the end, and I was. I ended up with 129.1 miles, and finished the ride in 10:08.

Itasca Disasta route.